HomeChairsTablesTable DiagramsPoly Solid Table LinensCharmeuse Table LinensDishesGlasswareServing EquipmentBar EquipmentOutdoor EquipmentLightingConcession Machines and Bubble MachinesCotton Candy Machine InstructionsPopcorn Machine InstructionsSnow Cone Machine InstructionsMiscellaneous rentalsContact Us

Enter subhead content here

Popcorn Machine Instructions


Important Precautions:

 The kettle will get very hot! USE CAUTION ALWAYS.

 Water must NEVER be put on the popping KETTLE!




 There are three switches on the popcorn machine:

       The kettle motor switch which powers the kettle.

             The heat switch which heats the kettle.

             The light switch which operates the lights on the inside of the machine.


1.      Turn "kettle motor switch" ON. For first batch only, let kettle warm up for about 4 minutes.


2.      Place one of the premixed corn and oil packets in the kettle. 


3.      After the corn has finished popping, rotate the handle to dump the popcorn.  (Do not wait too long after popping, or popcorn will burn.


4.      Repeat the cycle starting with step 2.  NOTE:  Always pop 4 to 5 batches of corn in a row.  The quality and flavor are both better on batches 2, 3, 4 and 5 than on the initial batch.


5.      When you are finished popping, make sure you turn the heat switch off.  Never leave the heat on when you are not popping. 

         If you place oil in a hot kettle, remember to finish that popping cycle, or turn off the kettle.


6.      When you are done popping, make sure the "KETTLE HEAT" and "KETTLE MOTOR" switches are in the "OFF" position.  NEVER LEAVE THE HEAT ON WHEN YOU ARE NOT POPPING!!



Enter supporting content here